oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if70.0m-30b 70.0 mhz if saw filter 29.10mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if70.0m-30b january 2011 rev a 70.0 mhz if saw filter 29.10mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1 = 180nh, c1 = 5pf output l2 = 150nh source/load impedance 50 ?
oscilent part number 835-if70.0m-30b january 2011 rev a 70.0 mhz if saw filter 29.10mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.9 70.0 70.1 insertion loss at fo db - 28.0 30.0 group delay variation (fo14.42mhz) nsec - 45 80 absolute delay at fo usec - 3.10 - passband ripple variation (fo 14.42mhz) db - 0.82 1.2 bandwidth at -1db mhz 29.00 29.10 - bandwidth at -3db mhz 29.15 29.30 - bandwidth at -40db mhz - 30.37 30.45 relative attenuation lower sidelobe db 54 60 upper sidelobe db 54 60 temperature coefficient ppm/c - -72 - note: relative attenuation smoothing ?on?
oscilent part number 835-if70.0m-30b january 2011 rev a 70.0 mhz if saw filter 29.10mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?40.0 db attenuation wide band
oscilent part number 835-if70.0m-30b january 2011 rev a 70.0 mhz if saw filter 29.10mhz bandwidth product specification p. 4 www.oscilent.com ripple variation (fo14.42mhz) group delay variation (fo14.42mhz) smith chart swr
|